Satellite TV Forum

The satsig calculator returned a value of "NaN" instead of a numerical result. I am trying to point to Telsat Nimiq 1 from Central Florida.

Hey All

I can't seem to get anything with my Dish setup.

I have a Starchoice 27 inch oval dish with the Standard dual output LNBF - I know it's a touch small for FTA, that's why I am trying to tune in G10r, it being fairly close to me, and with some strong signals. For a receiver I have a Twinhan VP1020a in my computer, and DvbTV as the software, (and MyTheatre).

Now I ...

Can I split satellite signal from one satellite(dual LNB) on the two recivers.Witch kind of switch and how can I do it?How many cables I have to ran?

I am quoting an existing client on cabling his house...he currently has a satellite with 1 receiver...he would like to get another receiver, but has 5 TV's, is there a way to split the signal through a bi-directional amplifier so you can watch different channels on any TV?

Thanks, Skeebo123

I want to split one incomming line from satellite to 2 receivers, is it possible,for 2 receivers from one line, thanks

How can I split my satellite signal between two receivers?

I have DirecTV with a DVR. Right now I am not able to record two channels at once because there is only one coax coming out of the wall. My landlord will not allow another line to be run by drilling though the outside wall nor is he willing to run another line through the building. Is there any other way I can get a second line so I can use both tuners? If I ...

I have had c-band for a long time. The dish is a 10 foot alluminum mesh must be 20+ years old but works fine. I recently bought a new digital receiver put in a new lnb and ku feed horn ran new wire etc.  
I am trying to get the best picture availiable can I use a magnetic protactor to determine the elevation? The dish is round and the feedhorn is centered with a ...

I am trying to split my tv satellite signal for my granddaughter's room. Since she only visits 2x each month, it is not worth extra expense of adding another converter box. I just want the antennae hookup and I can control the channels from the other tv with the converter box attached. I used to split a cable signal, but I have been told that a satellite signal is quite different from a cable signal ...

I used to do it with cable signal and split it into three tv's from one cable box using a 3-way splitter. it's possible that i will be watching the same channel on both tv's and can only be operated by remote control from one tv source. That's ok. I just want to watch it sometime in the garage while working on some stuffs.